Residential

Insulation that makes your house feel right

Blown-in attic insulation, batts, spray foam, removal, air sealing and radiant barriers for homes across the Metroplex — installed by experienced crews.

Get an Estimate 817-770-1867

Lower Energy Bills

Under-insulated attics let conditioned air escape all summer. Correct depth and air sealing cut how hard your system has to work.

Even Comfort

No more hot upstairs bedrooms or freezing floors. We fix the envelope, not just the symptom.

Cleaner Air

Air sealing attic penetrations can help reduce unwanted attic air, dust, and airborne contaminants entering the conditioned space.

What a proper attic upgrade includes

The right fix is more than just adding more insulation

Measure the current attic depth, air leaks, and moisture issues before recommending a scope.

Seal attic penetrations, top plates, and can-light gaps so conditioned air stops leaking out.

Remove old, damaged or settled material when needed, then re-install to uniform depth and coverage.

Walk the finished attic with you and explain what was done, what changed, and how it should perform.

Common attic upgrade levels

Attic targets vary by home, roof system, and existing conditions

Typical upgrade levels we see in DFW homes include R-38, R-44, R-49, and R-60, with approximate insulation depths that vary based on the product and the attic configuration. Final recommendations depend on the existing insulation, the roof and framing assembly, local code requirements, and the condition of the home.

Mustang evaluates each attic before recommending a system. We look at what is already there, where air is leaking, and what will improve performance without overbuilding the space.

Typical target ranges: R-38 · R-44 · R-49 · R-60
Final recommendation: Depends on the existing insulation, attic layout, product selected, local code, and the condition of the home.
Warranty guidance: Product and workmanship coverage varies by system and installation scope.

Recent Residential Projects

A look at homes, new builds and multi-family work

From single-family attics to new-construction spray foam and a 17-unit condo build in Arlington — a sample of recent residential work across DFW.

Residential attic insulation project in a DFW home

New construction closed-cell spray foam insulation install

New construction open-cell spray foam insulation install

17-unit condo build insulation project in Arlington, TX

Residential Services

What we install in homes

Blown-In Attic Insulation

Loose-fill fiberglass blown to an even depth across your attic floor — the fastest way to cut summer heat gain in DFW homes.

Fiberglass Batt Insulation

Cut-to-fit batts for walls, floors, garages and knee walls, installed tight with no gaps or compression.

Spray Foam Insulation

Open- and closed-cell foam that insulates and air seals in one pass, ideal for roof decks and hard-to-reach cavities.

Insulation Removal

Clean vacuum-out of old, settled, wet or contaminated insulation, with the attic left ready for a fresh install.

Attic Air Sealing

Sealing top plates, can lights, chases and penetrations so conditioned air stops leaking into the attic.

Radiant Barriers

Reflective barrier applied to the underside of the roof deck to knock down radiant heat during North Texas summers.

Attic Encapsulation

Bring the attic inside the building envelope for steadier temperatures, cleaner air and lower run times.

Crawlspace & Pier-and-Beam

Subfloor and crawlspace insulation for older DFW homes with cold floors, drafts and moisture problems.

Soundproofing

Acoustic insulation for offices, media rooms, shared walls and mechanical spaces where noise control matters.

Rodent Exclusion & Attic Sanitation

Seal the entry points, sanitize the affected areas, then re-insulate so pests stay out for good.

Homeowners

Get your attic evaluated for free

We'll measure your existing insulation, check for air leaks and pest damage, and tell you exactly what your home needs.

817-770-1867 Get an Estimate